The working principle of the opening machine

The working principle of the opening machine

The opening machine is mainly used to loosen fibers, cotton, textiles and other materials. After tearing, large tangled fibers are loosened into small pieces or bundles, At the same time, mixing and impurity removal were also involved in the process of release. The flowering machine is usually composed of a pair of feeding roller or feeding roller and a pine tin forest. The pine tin forest is equipped with a corner nail or a comb needle or a needle cloth or a porcupine beater. In order to open the pine more thoroughly, some are equipped with a work roll and stripping roll on the tin forest.

The transmission curtain of the opening machine is to send a large piece of fiber to the Angle nail curtain, the nail on the curtain rod in the process of operation will bring up the fiber, the cotton roller beyond the fiber between the two patterns off, and then through the role of the thin roller, the Angle nail curtain with a layer of fiber by stripping the cotton roller pulp fiber transferred to the cotton storage box, cotton storage box textile on a scale arm mechanism, When the fiber in the cotton storage box is about to reach the set weight, the electrical system sends a signal, and the Angle nail curtain begins to change speed and run slowly, so as to reduce the amount of cotton falling and achieve the accuracy of each bearing.

The carding function of the opening machine is a very key process. The role of carding is to process the fibers through the cotton cleaning process into a thin fiber net, and after laying and crossing into a net, for the acupuncture machine reinforcement. In the whole process of opening and cleaning cotton, the fiber must have a certain temperature, humidity and oil content, in order to prevent the fiber in the processing process due to electrostatic generation caused by fiber and equipment mutual adsorption, entanglement, flying phenomenon. According to the specific conditions of production, the method of unified humidification, centralized control of temperature and humidity or local heating and humidification can be adopted. Cotton is highly flammable, and the cotton treated with a flowering machine will catch fire. So in the use of opening machine flowering materials processing, special attention needs to be paid to fire prevention and personal safety.

Today, I will share these with you. Jinan Morinte Machinery co.,ltd is looking forward to your visit!